Alphatracks

So how do you tell the US version of the Sony Alpha A700 apart from it’s European cousin? The US version includes Sony’s version of the Minolta Grip Sensor, while the European models don’t.

This isn’t a case of Sony short changing European customers. Although the details are rather murky, it appears that the Grip Switch is made of a nickel alloy, and the European Union recommends that nickel not be used in proximity to human skin for lengthy periods. So apparently Sony decided to follow along with the recommendations and simply eliminated the grip sensor from the Alpha A700 models bound for Europe. This also applies to the add on vertical grip, the European models of both the camera and the accessory grip are sans the Minolta style grip sensor.

Here’s where everything gets sort of fuzzy. Apparently the recommendation is just that: a recommendation, not a law. So Sony probably wouldn’t have broken any regulations by including the grip sensor in European Alphas. No one seems to know whether Sony simply chose to voluntarily remove the sensor for the Alpha models sold on the European continent, or whether the European Union used some political muscle to force their hand.

No more phantom Eye-Start problems

Grip sensor on the Sony Alpha A700 helps prevent unwanted Eye-Start trigger, but don’t look for it in Europe.

Photo: Sony Corp, used with permission

Basically, the grip sensor is a useful addition to the Eye-Start system available in the Alpha A100 and many Minolta cameras. Eye-Start allows the camera to be in a low power standby mode until you raise the camera to your eye. When the camera senses your eye near the view finder, the camera changes to full operation, including metering, auto focusing, image stabilization, etc. When you move the camera away from your face, it returns to standby — a feature that can greatly extend battery life.

The problem with the eye-start system is that it can’t always tell your eye from your shirt sleeve or your pant’s pocket. Dangle an A100 on a neck strap while you wander about and the camera may turn on and off constantly as the camera falls against your clothing. It thinks it senses your eye, so it powers up the LCD, and attempts to meter and focus, even though you have no intention of shooting anything.

You can turn the camera off, but then if something really interesting turns up, you have to hope you don’t miss the shot while the camera goes through it’s start up sequence. Neither choice is very appealing, and many people have criticized the eye-start system because of the phantom power up cycles.

Sony listens to Alpha users

As I’ve said before, it appears that Sony listens to it’s customers, because they have corrected a number of issues that people had with the A100. One of the things they did was reach back into Minolta film SLR technology to bring back the grip sensor. If you have the grip sensor mode turned on, the A700 will remain in standby, even if it thinks you are looking through the viewfinder. Only when your hand is covering the sensor and your eye is at the viewfinder does the camera become fully operational. Or least that’s the way US versions of the A700 operate.

Grip sensor is not a pressure switch

If you are wondering why the switch has to be made of nickel, instead of some other material, the grip sensor is not pressure sensitive. Instead it actually uses a small electrical field across your skin to sense that your hand is there. So the sensor has to be made of a conductive material and Sony apparently couldn’t find an adequate substitute for nickel.

Many have pointed out the European Union recommendation are aimed primarily at things like ear rings and other body piercing jewelry. Simply touching nickel probably doesn’t present much danger for most users. Some people apparently have or are prone to develop allergic reactions to nickel. Let’s not forget the electrical current involved in the switch. It’s very small, but perhaps it could aggravate an allergy in someone using the Sony A700.

So no grip sensor for the Europeans, at least until Sony finds another material for the sensor. Does this mean that US cameras will cause allergies? I rather doubt it. There might be some people with a severe skin sensitivity that could be adversely affected by the nickel in the sensor. On the other hand, you find nickel in all sorts of products, from automotive controls to fountain pens to silverware. Most people aren’t bothered by these items — I sort of doubt that a camera control will have a much greater effect. Of course, I am not a doctor, so if you have a nickel allergy, you might want to discuss this with your medical adviser.

Remember that Minolta has made long use of a similar nickel grip sensor in the Maxxum/Dynax 7 and 9 as well as the A2 and A200. I haven’t heard of a rash (no pun intended) of photographers developing skin allergies from using these older Minoltas.

Why choose a electrical sensor over a switch?

Which leads to my next question, why exactly did Minolta choose to use the nickel sensor in the first place? A simple pressure switch would be cheaper, could be made of any hard materiel and could even be used with gloves on — something that can’t be said of the nickel sensor.

About the only reason I can think of for choosing the nickel sensor is that if you left the camera on when you put in a camera bag, padding or other equipment might possibly trigger both a pressure switch and the eye start system — running down the battery. Because the grip sensor actually measures current through your skin, it can tell the difference between a hunk of foam rubber and the fingers of your hand.

The Senswitch — forgotten Minolta technology

Yet Minolta long ago developed technology that could eliminate false triggers and didn’t require any electrical skin contact. Im refereeing to the Senswitch that appeared on the Minolta XK cameras in the mid seventies.

Minolta Senswitch is neatly hidden inside the grip on the XK Motor

The Senswitch was just simple pressure switch that turned the camera meter on when you touched it. It saved battery power, because the camera could be left in standby until the user pressed the switch.

I’ve heard that a lot of XK owners didn’t like the Senswitch on the basic XK model. It was just a long strip on the front of the camera, and apparently many photographers had trouble engaging the switch consistently. And it would also be vulnerable to pressure from other sources like the foam padding that could press upon it and drain the battery.

Minolta, however, followed up the plain vanilla XK with the incredible XK-Motor. This wonderful camera was my main shooting machine for many years, I loved the Senswitch on the XK-M, because Minolta moved it from the front of the camera to the inside of the built in grip. You would have to work awfully hard to miss engaging the Senswitch on the XK-M. If you were holding the camera by the grip, your middle-finger just naturally fell upon the switch. You almost couldn’t miss it.

Located deep inside the recess of the grip, the XK-Motor’s Senswitch was also fairly invulnerable to being pressed accidently by something other then your finger tip. I’m not saying it would be impossible for a hunk of padding or gear to engage it…but it would be a very rare occurrence. I never saw it happen in all the years I shot with my XK, Then again, I usually switched the camera off when it put in the bag.

One final thing. The XK-Motor’s switch was made of some sort of hard plastic , so you could use it with gloves.

It seems to me that Minolta had almost fool proof system with the XK-Motor’s Senswitch. Too bad Sony didn’t study the XK-M grip before opting for the nickel grip switch on the A700. It works even with gloves, it is fairly safe from accidental triggering and it won’t cause skin allergies. Oh yeah, they could sell the Senswitch in Europe as well.

Technorati Tags

Sony Alpha
A700
digital SLR
Grip Sensor
Alphatracks
Tom Bonner

Share This

Hi! If you're new here, you may want to subscribe to my RSS feed. You can also sign up to receive e-Mail updates from the homepage at http://alphatracks.com Thanks for visiting!

Bart Pasquale, who last appeared on these pages with his insightful comments on the Sony Alpha Full Fame - Antishake question, is back with a detailed analysis of the Sony battery for the A700 Alpha and it’s lack of compatibility with the A100 batteries.

The complete text of Bert’s email follows:

Hello Tom!

Here’s some info regarding the new Alpha A700 battery, the NP-FM500H. As you may know, there is a grove in the new battery, and a ridge in the A700 battery compartment, which prevents interchangeability with the A100 battery. I contacted my usual 3rd-party battery suppler from eBay, and he said Sony has blocked the manufacturing of NP-FM500H compatibles. It was not clear weather this is legal/political maneuvering, or simply an issue being able to reproduce the circuitry required for A700 to display the % charge remaining, but he expected something out of Taiwan by January. What he did know is that one person reported to him filing out the ridge inside their A700, and the A100 batteries did NOT power the A700.

A700 battery shown being loaded into new vertical grip. Notice the groove that allows battery to fit the A700 compartment.

Photo: Sony Corp, used with permission

Being the anti pay-for- proprietary-items consumer that I am, I find myself waiting it out to avoid buying a $80 Sony battery, understanding the implications of battery consumption suddenly became very important. So, I spent the past day and a half draining a fully-charged battery under controlled conditions. My goal was simple: take bursts of pictures throughout the day at various intervals, review the pictures, delete a few, and record the image count and battery charge remaining. Many batteries fall off very quickly once they indicate “half charged”, but SONY claims the new battery’s reported % is “accurate”, and the battery is good for 650 shots. Curiously, the second day I had the camera, I cranked off 900 pictures on a photo shoot, but the battery indicator still showed being more than half-charged. Let’s examine…

I began with a fully charged battery two days ago, At various intervals (a few hours to a few minutes) I would fire off 50-100 images, and review them, at a medium pace, deleting every few images as I went. I was shooting compressed RAW, anti-shake on, DRO standard. This simulates my camera use in the studio or shooting on location. After the first 50%, I continued to review the imagers quickly, but did not delete many images, as I might do to conserve battery power while on a shoot. The results are summarized in the following table:

	Shots	% Charge	Charge Drain Rate
Day One:	0	100%
	550	75%	1% = 22 frames
	1200	50%	1% = 26 frames
Day Two:	1800	25%	1% = 24 frames
	2600	1%	1% = 32 frames
	3080	Dead	1% = 400 frames

Over 3,000 shots from a single charge! I’ve never worked so hard to drain a battery. That was the battery’s third charge, so we’ll see how that changes after a couple dozen cycles, and how the generic versions hold up to that when they finally do come out. A few other statistics:

• Reviewing 150 images uses 1% of battery charge
• Leaving the display on for about 5 minutes uses 1% of battery charge
• Overnight, the battery looses about 2%-3% of it’s charge
• Straight shooting without reviewing images can achieve 30+ frames per percent at any phase in the charge cycle.
• Once the battery indicates zero charge, you can still quickly eek out a few hundred shots!
• This is about an extra 12% of charge not indicated in the charge level.

During recharge, the first 15 minutes were spent to achieve 1% charge status back. After that, it was pretty linear, adding about 12% every 15 minutes achieving 86% after 2 hours of charging. The battery indicated “100%” about 35 minutes later, but continued to take a charge for an additional 15 minutes to top it off. So, one could theoretically shoot 400 frames, recharge for 15 minutes while the model changes, and never run out of charge. Of course, YMMV; I don’t know how consistent one battery will be to the next. Happy shooting all!

- Bert Pasquale

BTW, I have a couple well-cared-for A100’s for sale! (With several extra batteries…)

Wow, that is a pretty exhaustive (no pun intended) sample of the battery life of the NP-FM500H when used in the A700.

I found it interesting that someone would actually go as far as removing the locking ridge from a new A700 to try to use the older battery. The fact that the NP-FM55H (used in the A100) would not power the A700 indicates to me that the ridge serves a purpose beyond an attempt to sell more batteries. It’s easy to point to an incompatibility like this and suggest it is being done to sell more batteries. I’ve found that manufacturers rarely make components less compatible just to move additional product. They have to stock additional components, manufacture additional components and distribute two lines of batteries instead of one. Usually is in the company’s best interest to stock and sell as many common items as they can, because that drives manufacturing and stocking cost down.

That said, several printer manufactures have taken great pains to make sure only their own cartridges work with their hardware. So who knows? This could be Sony’s attempt to eliminate after-market battery competition, but I doubt it. Usually when an electronic product carries a lock out ridge like the one described above, it is to prevent using a non-compatible item that might cause damage to the devise. The upshot is A100 batteries are NOT compatible with the A700 — don’t try to reengineer the camera or battery in attempt to make them work.

It Bert’s tests are indicative of how long a typical NP-FM500H will last, it seems like for most shooters a single battery will cover most assignments. A second battery, either used as a spare or inserted in the A700 Vertical grip should be more then sufficient power for most A700 shooters.

Thanks again Bert, this is a great report. If anyone is interested in Bert’s A100 gear, email me and I will get you in touch.

Technorati Tags

Sony Alpha
A700 battery
digital camera
dSLR
Tom Bonner
Alphatracks

Share This

Is your Minolta SRT model looking a little rough? What about your old reliable XD-11? Does it still look pristine? Maybe your XG-7 could use a little refurbishing. If you got an old, but well loved Minolta SLR, you can make into something very special. With a little elbow grease and a replacement leather kit from CameraLeather, you can turn your run-of-the-mill SLR into a one-of-a-kind show camera.

While CameraLeather won’t necessarily make your camera take better photos, it will definitely increase your pride in ownership. I’ve always found that when I value a special instrument, I tend to work harder at getting a result that matches the quality of the tool. So in the end, these kits might just improve the caliber of your photos after all.

Make your classic Minolta a real standout. CameraLeather offers a wide variety of colors and textures as these SRT models demonstrate.

Photo: CameraLeather, used with permission

CameraLeather, as the name implies, offers a line of leather kits that any handy DIYer can use to resurface the grip area on their classic SLR. DSLRs, with their molded, composite bodies probably don’t lend themselves to leather covering. The older metal bodied cameras, on the other hand, are the perfect target for one of these leather kits. Since CameraLeather offers a wide range of colors and styles, you an customize your aging SRT or XD-11 to look better than new. Best of all. the kits are inexpensive, ranging in price from to $10.50 for synthetic materials to $44 for the exotic kid skins. Most of the pre-cut covering kits for 35mm SLRs are less then $20.00. The biggest investment required in the time you invest to remove the old overing and apply the new one.

CameraLeather offers an incredible array of coverings.

Photo: CameraLeather, used with permission

To my mind, these leather coverings evoke an earlier era, when wealthy people would tote beautifully crafted classics with them on far flung-travels. I could imagine seeing one of these aboard the Orient Express or on a trip up the Nile in one of Agatha Christie’s novels. These cameras wouldn’t look out of place in a stateroom on the Titanic, either.

Too British for you? How about a fellow named Gatsby slinging one of these over his shoulder, bound for a day of yacht racing off Newport, Rhode Island. I would think a leather endowed XD-11 would be just his thing.

Ok, enough romanticizing. These leather covered cameras are uber-cool, but are they practical? I don’t want to lock my camera up in a display case — my cameras are for taking photos. How well will these coverings hold up?

That is one of many questions I had for Morgan Sparks of CameraLeather. Following are my questions and the answers provided by Sparks::

How difficult is it to recover Minolta SRT and X series SLRs?

How well does the leather stand up in use? Can someone use the camera regularly without damage from sweaty palms or oily skin?

Has anyone tried your fabric on lens barrels? After long use, some of the rubber grips on my Rokker lenses have stretched or come off completely. It might be interesting to buy a matching fabric sheet and cut it to fit the lens, making the lens and camera match. Impractical? What do you think?

Hmm. This seems like a very interesting project. There are a couple of hitches, however. First, it’s been years since I actually shot film. I still have some of my old SLRs and it might be fun to take one out and play with it now and then, but the film train has pretty much left the station. And she ain’t ever coming back.

Secondly, I am at a loss to think of which of my old SLRs I would want to cover. My old SRTs are pretty well used. They have been dropped, nicked, exposed to all manner of hard use — one has even been run over by an errant race car.

Other metal bodied Minolta SLRs, like this XD11 are also good candidates for the leather treatment..

Photo: CameraLeather, used with permission

Don’t get me wrong, I’m not careless about my equipment, but sometimes getting the shot is more important than keeping the camera in pristine condition. So these scars are a badge of honor as far as I’m concerned. But I’m afraid an immaculate leather covering would clash with the scared metal housing. I would have to distress the leather to make it match — that doesn’t seem like a very good idea.

I do have a mint Minolta SR-7 and I’m sure a leather covering would look great on it. CamaeraLeather doesn’t offer a kit expressly for the SR-7, but it is so close in appearance to the later SRT series that I think I could adapt a SRT kit. If not, CameraLeather sells uncut sheets of the adhesive backed leather so I could go that route and custom make my covering.

But as I said, the SR-7 is in mint, nearly unused condition. It probably isn’t greatly valuable today, but I would guess in the coming years it might be worth something. But it I remove the original hard covering and replace it with leather, the camera probably will not have any real value to a collector. Sigh.

Maybe I could look around for an old XD-11 on ebay. It would lend itself well to the refined look of leather and Minolta made enough of them that they wouldn’t be as much of a collector’s item as the older SR model.

Leather is precut for every supported camera model.

Photo: CameraLeather, used with permission

I wonder what it would be like to shoot film again? I’m going to have to think about that. I would never return to film in place of digital for my professional work…but it might be fun to haul around a leather bound film SLR for family events and the like.

While I’m studying on the problem, if you have a suitable candidate for a leather treatment, check out the CameraLeather website.

If you do try your hand at recovering an old Minolta SLR, send in some photos so I can share with other Alphatracks readers. Who knows, maybe we can spark a revival of classic Minolta SLRs.

Technorati Tags:

Minolta SLR
film camera
photography
camera mod
Tom Bonner
Alphatracks

Share This

Alphatracks has always been aimed at Sony and Minolta SLR users. Not that there is anything wrong with non-SLR gear, There have been numerous great non-SLR cameras sold under the Sony/Minolta brands. You have to draw the line somewhere, however, and since I have primarily used SLRs, I like to stick to what I know.

I’ve noticed that many readers are somewhat unclear as to which cameras are actually SLRs. Some appear to think it means any camera that uses interchangeable lenses. (Which is not the case.) Others mistakenly apply the term to so-called “bridge” or pro-summer cameras. These cameras typically rely on an electronic view finder (EVF) , which disqualifies them as a dSLR. So what exactly makes a camera SLR?

Shouldn’t that be a MLR?

It’s the instant return mirror (and supporting system) that puts the reflex into a SLR.

Most people know that SLR stands for “single lens reflex,” which in itself is fairly confusing. After all, nearly 100 percent of the SLRs ever produced are designed with an interchangeable lens mount. Shouldn’t these cameras be called Multiple Lens Reflex cameras?

To understand just why we refer to these cameras as single lens units we need to examine a bit of camera history, The early cameras, such as those used by Matthew Bradey during the American Civil War, recorded a single image at a time. The photographer looked through the lens, focused, composed and then inserted the film plate behind the lens to make an image. While the entire process was crude by today’s standards, the photographer enjoyed great control, since he looked directly through the actual imaging lens to compose the shot.

While this was satisfactory for still life, portraits and landscapes, this process did not lend itself to rapid photography. These early cameras could only record one image at a time. Which is why you have never seen a motor-driven view camera.

Realizing the need to offer sequences of exposures, camera makers begin to experiment with various roll-film designs, With a roll of film in the camera, the photographer could fire off continuous images without reloading. While this improved throughput dramatically, it caused another problem. The roll of film had to pass closely behind the camera’s optics, which meant that the photographer could no longer look through the camera lens to design the shot.

Rangefinder cameras appear to keep things in focus

There was no problem with the lower-end consumer roll-film cameras, because these generally used an inexpensive “fixed-focus” lens. Better quality optics require the lens to be focused, however, and as we’ve seen, the photographer couldn’t look through the lens with a roll-film camera. One of the first solutions to this problem was the Rangefinder — a type of camera that offered a distance measuring scale in the viewfinder. By determining the range from the viewfinder, the photographer could then adjust the focus to match — usually with very good results.

Twin Lens Reflex cameras offer another solution

Twin lens reflex used upper lens to focus, lower lens actually took the photo.

While the rangefinder type cameras worked well, the camera industry is always evolving. A second method of allowing the photographer to focus and compose appeared in the “Twin-Lens Reflex” cameras. These cameras used two identical lenses, arranged one on top of the other in the manner of an over-and-under shotgun. The film winds past the lower lens, while the photographer can focus through the upper lens. Since most of the twin-lens cameras were fairly bulky, designers added a mirror and ground glass to the top of the camera, hence the term “reflex.

Now the user could hold the camera at waist level and look down at the ground glass which previewed the image via the mirror behind the upper lens. As the user adjusted the focus on the upper lens, a gear mechanism moved the lower “taking lens” to match.

While both rangefinders and twin-lens cameras offered a credible way to focus and preview a shot, neither allowed the photographer to look directly through the imaging lens. This made exact composition difficult in certain situations.

SLRs take cameras another step forward.

Cut-away view shows the light path through a typical SLR. Light enters through the lens, hitting the lower mirror, where it is reflected upwards. It then strikes the top of the prism, where it is reflected again to strike the front of the prism. It is reflected yet a third time to pass through the viewfinder.

In their quest to allow users to see through the actual “taking” lens, camera makers turned to the periscope — a simple device using two mirrors placed at opposite angles to bend the light path. Periscopes are easy to understand — any kid can construct one from a couple of mirrors and some scrap wood. In a camera, the lower mirror is placed at a 45 degree angle directly behind the lens. Light striking the mirror is projected upwards to a ground glass. A pentaprism, which contains two additional mirrors, is located behind the viewfinder. The prism is used to flip the image so it can be viewed “right-side up”

There is just one hitch. If you’ve been paying attention, you no-doubt realized that the lower mirror blocks the light path to the film (or digital sensor as the case may be.) Now the photographer can look though the lens, but the image can’t be projected on to the film plane.

So the camera designers had to add another wrinkle. They had to move that mirror. Just long enough to make an exposure, since when the mirror moved, the photographer couldn’t see anything through the lens. So they designed the “instant-return” mirror.

At the instant of exposure, the mirror flies upward, the shutter opens, closes and the mirror snaps back down. It is a incredible feat, when you consider that instant return mirrors have to flip up and back in a heartbeat, over and over for the life of the camera.

Once the instant return mirror was perfected, photographers could once again design their images by looking through the lens. Unlike the twin lens reflex, this new breed of camera needed only one lens to focus and shoot with. So they became known as… you guessed it…. Single-Lens Reflex cameras.

Digital SLRs work exactly the same way — the same reflex system of mirrors and prism is used in front of a a digital sensor instead of film.

For further reading:

Wikipedia SLR page>

How Stuff Works - Single Lens Reflex

Images on this page published under the GNU Free Documentation License.

SLR Cutaway derived from image provided by:
Juhanson

Rolleiflex Twin Lens Reflex provided by
Jean-Jacques MILAN/Photographie - 40

Technorati Tags:
single lens reflex
DSLR
digital camera
photography
Alphatracks
Tom Bonner

Share This

Sony’s first dSLR. the Alpha A100, was a great effort, but it did fall short in a few areas. From the e-mail and comments i get at Alphatracks, the biggest complaint about the A100 is that it didn’t offer a vertical grip option.

As I’ve pointed out before, this wasn’t Sony’s oversight. The A100 was based to a large degree on the very successful Konica-Minolta Maxxum 5D. For some unexplained reason, Minolta and friends crippled the 5D by not designing it to use a vertical grip. The 5D’s big sibling, the Maxxum 7D, did offer an optional battery grip, but the 5D was a different design and couldn’t use the 7D grip.

New grip adds 3.5 inches and a pound of weight to the A700

When Sony built the A100 on the chassis of the 5D, there was no provision for a grip. Sony would have had to heavily massage the 5D components to add grip connections and controls, making the camera more expense and most likely delaying the launch. So Sony wisely brought the A100 to market without an accessory battery grip.

Aftermarket vertical grips for the A100 selling briskly

This hasn’t stopped some aftermarket accessory makers from developing grip fro the A100. We’ve discussed the DeCain and Ownuser accessory grips on these pages in the past.

• Aftermarket Vertical Grips for the Sony Alpha and Minolta dSLRs
• The Sony A100 vertical grip saga continues
• Vertical grip options for the Sony A100 and Minolta 5D

Many photographers have had good experience with the aftermarket units, but since there are no internal contacts to allow a grip to communicate withe the camera, users have to put up with external cables to get the job done While it’s mice to have an aftermarket alternative, it’s obvious that a factory designed grip with internal connections would be a preferable solution..

When the Sony started to design the Alpha A700 dSLR, they started from scratch. Sony went to a lot of effort to make sure the Alpha A700 corrected any weaknesses inherent in the A100. One of the first things they did was add internal connections for a battery grip. The grip, known as the VG-C70AM is due to start shipping this month.

The two biggest demands for a vertical grip center around better handling when shooting in a vertical mode and the addition of extra battery power. Sony nailed both of these objectives with the VG-C70AM grip.

Vertical grip enhances the Alpha A700’s ability to shoot in the portrait orientation.

Everything the horizontal grip can do, the vertical grip can do as well

The new A700 vertical grip looks like someone took an A700, cut the standard grip off and glued it to a battery container. Every control and button that appears on the camera’s built-in grip is mirrored on the accessory grip — in virtually the same location. Anything you can do with the standard grip you can accomplish with the accessory grip as well. Since the A700 automatically rotates the menus on the camera’s big LCD screen, this results in an excellent vertical image making machine.

Two batteries are better than one

As far as extra power goes, the grip has provision for two NP-FM500H batteries, which Sony claims will produce twice the battery life. (Well, duh!) . You have to remove the camera’s standard battery to attach the grip, so you only have two batteries available — but that is still a major improvement.

Two batteries power the removable grip.

The question of weight naturally arises. The VG-C70AM weighs in at 10.1 ounces without batteries. Add two NP-FM500H power cells at 2.75 ounces each and the whole works is still slightly under 1 pound. The grip also adds about 3.5 inches (87.2mm) to the height of the A700 — a nice bonus if you have large hands.

Like he A700 itself, the VG-C70AM battery grip is constructed with an internal Magnesium-Alloy. Sony also says the unit has rubber gaskets to seal out dust and moisture.

Vertical grip should be forward compatible

Now there is good news and bad news. The bad news is that the VG-C70AM cannot be retrofitted to the A100, The A100 and A700 have completely different camera bodies and as we’ve already discussed, there are no internal provisions for a grip on the Alpha 100. So if you were hoping to bolt one of these bad boys to your A100, you’ll have to be content with on of the aftermarket solutions.

Ah, but there is a very good chance that the VG-C70AM will be fully compatible with Sony’s next dSLR; the famous Sony Alpha flagship. Based on the mockups shown last March, the A700 and the flagship share a common body. Thus the flagship (which many observers are calling the A900, although Sony hasn’t confirmed the name) will most likely be able to use the VG-C70AM. It makes sense, as it will save tooling and design costs if Sony can create a single grip for both models.

Rear side of the grip shows the thoughtful control layout.

Of course the standard disclaimers apply. Sony has only revealed a mockup of the flagship, so there is no guarantee that the A700 grip will be compatible. Don’t base your buying decisions on the mockup, as things could very well change. If I was a betting man, however, I would give you pretty good odds that the VG-C70AM will fit the flagship when it appears..

Sony Alpha
Vertical Grip
Alpha A700
VG-C70AM
digital SLR
photography
Tom Bonner
Alphatracks

Share This

Sony is offering a free firmware update for the A700. According to the release, the new firmware update

“improves image sharpness and reduces noise under certain circumstances and improves flash control at very short distances with non-ADI control lenses.”

Sony says the update offers:

• Sharper images for pictures taken under low contrast conditions
• Reduced noise for pictures taken at ISO 3200
• Improved flash control for objects closer than 1 meter with non ADI controlled lenses

In addition to the updated firmware, Sony is also updating the Image Data Converter SR and Image Data Lightbox SR applications included with the camera.

You can download the Windows and Macintosh versions of the firmware and software updates at the Sony Support site.

Alpha A700
Firmware update
photography
digital camera

Share This